Products

  • Two-piece forged alloy wheel , consisting of two parts: the rim and the spoke.

    Two-piece forged alloy wheel , consisting of two parts: the rim and the spoke.

    The 2-piece forged alloy wheels divides the entire wheels into two component parts, the rim and the spoke, which are connected by a special bolt and nut or directly welded.

  • 17, 18, 19, 20, 21, 22 inch, forged alloy wheels car rims

    17, 18, 19, 20, 21, 22 inch, forged alloy wheels car rims

    Aluminum alloy forged wheels, using aviation aluminum-magnesium material T6061, the product adopts direct forging, integral superplastic one-time rapid prototyping process, quenching and tempering after T6 heat treatment process, which can effectively improve mechanical properties, enhance corrosion resistance, high toughness, after processing It is not easy to deform, and the material is dense.

  • forged alloy wheels rims 16/17/18/19/20/21/22 inch size car alloy wheel

    forged alloy wheels rims 16/17/18/19/20/21/22 inch size car alloy wheel

    Forging: a great combination of strength, lightness and ductility.

    The mechanical and physical strength characteristics of a forged wheel are equally distributed throughout the wheel on a molecular level. The result is far greater strength and resistance than an equivalent cast wheel, vastly improving the performance of the wheel when faced with impacts and high levels of load stress.

  • passenger wheels aluminum 4-6 holes forged alloy car wheel rims alloy wheels

    passenger wheels aluminum 4-6 holes forged alloy car wheel rims alloy wheels

    The wheel is a barrel-shaped part, the inner contour of the tire supports the tire, and the center is a metal part mounted on the shaft. According to different diameters, widths, molding methods and materials, there are many kinds of wheels.

  • deep dish car rim 16 17 18 19 20 21 22 inch customized forged car alloy wheel rim Jaguar

    deep dish car rim 16 17 18 19 20 21 22 inch customized forged car alloy wheel rim Jaguar

    Forged hubs are hubs manufactured by forging. The hubs manufactured in this way can remove internal pores and cracks to the greatest extent. And it is often used in the form of multiple forging, which can ensure the removal of various material defects, increase the internal stress of the material, and the toughness will be better, which can greatly improve the impact resistance and tear resistance at high speeds.

  • Commercial Vehicle Coach And Truck Forged Alloy Wheels

    Commercial Vehicle Coach And Truck Forged Alloy Wheels

    Forged aluminum alloy commercial truck and coach wheels solve cracks and airtightness problems. It directly avoids the problem of rim cracks and air leakage caused by excessive steering torque impact. The steering wheel installed on the steering bridge (front axle) deflects a certain angle relative to the longitudinal axis of the car to complete the car turning, changing lanes and other actions.

  • Forging Wheels Customized Rims and Wheels New Passenger Car Wheels

    Forging Wheels Customized Rims and Wheels New Passenger Car Wheels

    Wheel Diameter: 16–22″

    PCD: 66.6mm, 67.1mm, 71.6mm, 72.6mm, 74.1mm, 84.1mm, 110, 112mmm, 114.3mm, etc

    Colour: Red Bronze, Black, Grey, yellow, Bright black, Bright, grey, Matte black, matte grey, etc (Fully Customizable with paint able inserts which can be colour coded or finished in a colour scheme of your desire..)

  • Black finish, polished faces, matted grey. Y Spoke forged alloy wheels

    Black finish, polished faces, matted grey. Y Spoke forged alloy wheels

    Forged wheels are wheels manufactured by forging. The wheels manufactured in this way can remove internal pores and cracks to the greatest extent. And it is often used in the form of multiple forgings, which can ensure the removal of various material defects, increase the internal stress of the material, and the toughness will be better, which can greatly improve the impact resistance and tear resistance at high speeds.

  • forged alloy wheels Blade wheels, diamond wheels, pinnacle wheels

    forged alloy wheels Blade wheels, diamond wheels, pinnacle wheels

    The process of forging aluminum wheels is to use high pressure (mostly 10,000 tons of pressure) to press a piece of alloy that has been heated to nearly 500 degrees into a rough embryo (prototype) of the wheel, undergo a powerful cold spinning process, and then enter T6 Heat treatment, then secondary processing with CNC detail engraving.

  • light weight and sporty style forged alloy wheels car rims

    light weight and sporty style forged alloy wheels car rims

    There are many kinds of hubs according to their diameters, and there are also many kinds according to their widths. Then, different diameters, different widths, and different materials can be divided into many models. Some car owners think that the original tires are not advanced enough and want to upgrade, often by widening, reducing the aspect ratio, increasing the diameter, and changing the material. At this time, if the wheel must be changed, it is called a modified wheel.

  • High quality Mercedes forged alloy wheels custom rims wheels

    High quality Mercedes forged alloy wheels custom rims wheels

    Brakes, wheels, and shock absorbers are three-piece refitting, which are big pieces that most car enthusiasts will upgrade. And because the wheel occupies a large part of the surface of the body, it is one of the best ways to change the temperament of the vehicle and enhance the appearance of the vehicle. Therefore, the wheel upgrade has always been the most popular modification method currently.

  • Porsche forged alloy wheels the design of the sporty Y/U spokes

    Porsche forged alloy wheels the design of the sporty Y/U spokes

    There are many kinds of hubs according to their diameters, and there are also many kinds according to their widths. Then, different diameters, different widths, and different materials can be divided into many models. Some car owners think that the original tires are not advanced enough and want to upgrade, often by widening, reducing the aspect ratio, increasing the diameter, and changing the material. At this time, if the wheel must be changed, it is called a modified wheel.

12 Next > >> Page 1 / 2